85
3
Taking Pictures
In R (Program) mode, the shutter speed and the aperture are set
automatically by the camera during shooting. However, you can select
other functions such as the flash mode and recorded pixels.
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller (2345) to select R
(Program).
3
Press the 4 button.
Program mode is selected and the
camera returns to capture mode.
When the camera detects a person’s
face, the Face Detection function is
activated and the face detection frame
appears (
p.81
).
4
Set the functions you want to use.
Refer to “Setting the Shooting Functions” (p.117 - p.146) for details of
how to set the functions.
5
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
6
Press the shutter release button fully.
The picture is taken.
Setting the Functions (Program Mode)
Taking Still Pictures 1p.74
Four-way controller
4 button
Shutter release
button
38
38
P
To Next Page
Loading...
