285
8
Connecting to a Computer
Transferring Images Using an Eye-Fi
Card
You can automatically transfer images or movies to a computer or similar
devices via wireless LAN using a memory card that is equipped with the
wireless LAN (Eye-Fi card) function.
1
Specify the wireless LAN access point and transfer
destination on the Eye-Fi card.
For details on how to set up the card, refer to the operating manual
supplied with the Eye-Fi card.
2
Turn the camera off.
3
Insert an Eye-Fi card that has been set up.
4
Turn the camera on.
5
Set [Eye-Fi] in the [W Setting] menu to O (On).
The images are transferred automatically. For details on how to set up
the camera, refer to “Setting the Eye-Fi Communication” (p.249).
The following icons appear on the display.
During Eye-Fi communication. The camera is
communicating or searching for the access point when
[Eye-Fi] is set to O (on).
Eye-Fi communication waiting. The camera is not
communicating when [Eye-Fi] is set to O (on).
Eye-Fi communication prohibited. When [Eye-Fi] is set to
P (off).
Eye-Fi version error. The version of the Eye-Fi card is out
of date or the card is write-protected.
Acceptable Eye-Fi cards
• Eye-Fi Share
• Eye-Fi Share Video 4 GB
Run the latest firmware on your Eye-Fi card.
To Next Page
Loading...
