Pentax Optio W90 - Registering the Subscreen Image (Subscreen Input)

256
7
Settings
You can choose the subscreen image displayed on the upper-left corner
of the display.
• One of the 3 pre-installed screens
• One of your own images (compatible images only)
1 In Q mode, press the four-way controller (3).
The Playback Mode Palette appears.
2 Use the four-way controller
(2345) to select D
(Subscreen Input).
3 Press the 4 button.
The image selection screen appears.
4 Use the four-way controller
(45) to choose the image for
the subscreen.
Only images suitable for the
subscreen are displayed. You can
also choose one of the 3 pre-installed
screens already stored in the camera.
5 Press the 4 button.
The subscreen image is set.
Registering the Subscreen Image
(Subscreen Input)
Once the subscreen image has been set, it will not be deleted even if the
original image is deleted or the SD Memory Card is formatted.
1/2
Subscreen Input
MENU
Cancel
OK
OK
Set to display the
selected image on
shooting screen
100
10 0
-
0017
00 1 7
100
-
0017
MENU
Cancel
Cancel
OK
OK
Cancel
OK
OK