Pentax Optio W90 - Framing Your Pictures (Frame Composite Mode)

101
3
Taking Pictures
In N (Frame Composite) mode, you can take pictures using the frames
stored in the camera.
1 Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2 Use the four-way controller (2345) to select N
(Frame Composite).
3 Press the 4 button.
The 12-frame display of the frame selection screen appears.
4 Use the four-way controller
(2345) to choose the frame
you want to use.
5 Press the y button.
The selected frame appears in single-image display.
You can choose another frame using either of the following operations.
Framing Your Pictures (Frame Composite Mode)
Four-way controller (45) Press to choose a different frame.
Zoom button (f) Press to return to the 12-frame display of the frame
selection screen, and then perform step 4 to
choose a different frame.
Four-way controller
4 button
Shutter release button
f/y button
OK
OK
OK
OK
OK
OK