106
3
Taking Pictures
You can use the remote control (optional) to take pictures while you are
away from the camera.
1
Press the four-way controller (2) in A mode.
The [Drive Mode] screen appears.
2
Use the four-way controller (45) to select i and press
the four-way controller (3).
3
Use the four-way controller
(45) to select i or h and
press the 4 button.
The self-timer lamp begins to blink
slowly and be ready to take a picture
by the remote control.
When the camera detects a person’s
face, the Face Detection function is activated and the face detection
frame appears (p.81).
Taking Pictures Using the Remote Control Unit
(Optional)
i
3-sec Remote
Control
The shutter will be released after about three seconds when
the shutter release button on the remote control unit is pressed.
h
0-sec Remote
Control
The shutter will be released immediately when the shutter
release button on the remote control unit is pressed.
Four-way controller
4 button
Shutter release
button
MENU
Cancel
MENU
Cancel
OK
OK
OK
OK
Drive Mode
Drive Mode
Remote Control
Remote Control
To Next Page
Loading...
