184
4
Playing Back and Deleting Images
Connecting the Camera to AV
Equipment
You can connect the camera to a TV or other device with a video IN jack
or HDMl terminal and playback images.
By using the supplied AV cable (I-AVC7), you can capture and play back
images on equipment with a video IN jack, such as a TV.
• The power lamp on the camera lights up during a connection.
• If you intend to use the camera continuously for a long period, use of
the AC adapter kit K-AC88 (optional) is recommended. (p.43)
• For AV equipment with multiple video IN jacks, check the operating
manual of the AV device, and select the video IN jack to which the
camera is connected.
• You cannot output composite and HDMI video at the same time.
• The camera display turns off while the camera is connected to AV
equipment.
• You cannot adjust the volume on the camera when connected to an
AV device. Adjust the volume on the AV device.
• When the camera is connected to an AV device, you can switch the
images with the remote control (optional).
Connecting the Camera to a Video IN Jack
VIDEO
AUDIO
(L) (R)
PC/AV terminal
Yellow White
External Input
Terminal
To Next Page
Loading...
