113
3
Taking Pictures
1
When the shooting screen for the second image is
displayed in step 5 on p.112, press the 4 button or the
four-way controller (3).
A confirmation dialog appears.
2
Use the four-way controller
(23) to select an option and
press the 4 button.
• To minimize distortion when taking the second image, turn the camera
so that it pivots around the right edge of the preview guide on the
screen.
• Some distortion may result from moving objects, repeating patterns, or
if nothing exists when overlapping the first and second image on the
preview guide.
• When the Face Detection function is activated (p.81), it works only
when taking the first shot.
• The number of recorded pixels for images captured with X mode is
fixed at f (2592×1944).
• (1cm Macro) is unavailable in X mode.
• You cannot change the information on the display by pressing the 4/
W button in X (Digital Wide) mode.
To Cancel after Taking the First Shot
Save
Saves the first image and you
can retake the first shot. The
first image is saved at
h
(2048×1536).
Discard Discards the first image and
you can retake the first shot.
Cancel Returns to the shooting
screen for the second image.
Save
Discard
Save the image(s) and
exit this screen?
Save the image(s) and
exit this screen?
Cancel
OK
OK
OK
OK
To Next Page
Loading...
