Pentax Optio W90 - Page 117

115
3
Taking Pictures
5 Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
6 Press the shutter release button fully.
The screen for taking the second frame is displayed after you take the
first frame.
If you select right (5) in step 4:
The right edge of the first frame appears in semi-transparent form on
the left edge of the display.
If you select left (4) in step 4:
The left edge of the first frame appears in semi-transparent form on
the right edge of the display.
7 Take the second frame.
Move the camera so that the semi-
transparent image and the actual view
overlap and press the shutter release
button.
8 Take the third frame.
Repeat steps 5 to 7 to take the third frame.
The panorama images are joined and a stitched together image
appears.
The stitched together image does not appear when [Instant Review]
(p.139) is off.
• Some distortion may result from moving objects, repeating patterns, or
if nothing exists when overlapping the first and second frames or the
second and third frames on the preview guide.
• When the Face Detection function is activated (p.81), it works only
when taking the first shot.
• You cannot turn off the LCD or change the display to “Simple Display
+ Subscreen” by pressing the 4/W button in F (Digital
Panorama) mode.
Exit
Exit
2nd Frame
2nd Frame
OK
OK
SHUTTER
SHUTTER
Exit2nd Frame
OK
1 2
SHUTTER