Pentax Optio W90 - Page 128

126
3
Taking Pictures
1 Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2 Use the four-way controller (23) to select [Recorded
Pixels].
3 Press the four-way controller (5).
A pull-down menu appears.
4 Use the four-way controller
(23) to change the number
of recorded pixels.
5 Press the 4 button.
The setting is saved.
6 Press the 3 button.
The camera returns to capture mode.
• The number of recorded pixels for images captured in 9 (Green)
mode is fixed at E.
• The number of recorded pixels for images captured in N (Frame
Composite) is fixed at h/L.
• The number of recorded pixels for images captured in X (Digital
Wide) mode is fixed at f. (The number of recorded pixels will be h
if you exit Digital Wide mode without taking the second picture.)
• The number of recorded pixels for images shot in (Report) mode
is set to V (1280×960).
• If you take and save only the first frame in F (Digital Panorama)
mode, the number of recorded pixels is fixed at i.
• The number of recorded pixels for images captured in c (Digital SR)
mode is fixed at f/W.
• The number of recorded pixels for images captured in (Digital
Microscope) mode is fixed at L.
MENU
Cancel
OK
OK
Recordable Image No.
12
7 M
5 M
12 M
5.3 M
3.8 M
9 M
Recorded Pixels
Image Tone
Quality Level
White Balance
AE Metering
AF Setting