Pentax Optio W90 User Manual

3
Warning
• Always use the battery charger and AC adapter exclusively developed for
this product, with the specified power and voltage. Using a battery charger
or AC adapter not exclusive to this product, or using the exclusive battery
charger or AC adapter with an unspecified power or voltage can cause a
fire, electric shock, or camera breakdown. The specified voltage is 100-
240V AC.
• Do not disassemble or modify the product. This can cause a fire or electric
shock.
• If the generation of smoke or strange odor from the product or other
abnormality occurs, immediately discontinue its use and consult a
PENTAX Service Center. Continuing to use the product can cause a fire or
electric shock.
• If water should happen to get inside the product, consult a PENTAX
Service Center. Continuing to use the product can cause a fire or electric
shock.
• If a thunder storm should occur while using the battery charger or AC
adapter, unplug the AC plug cord and discontinue use. Continuing to use
the product can cause damage to the equipment, fire, or electric shock.
• Wipe off the plug of the AC plug cord if it becomes covered with dust. Dust
on the plug may cause a fire.
Caution
• Do not place heavy objects on the AC plug cord, allow heavy objects to
drop onto it or allow the AC plug cord to become damaged due to
excessive bending. If the AC plug cord becomes damaged, consult a
PENTAX Service Center.
• Do not short or touch the output terminals of the product while it is still
plugged in.
• Do not plug in the AC plug cord with wet hands. This can cause an electric
shock.
• Do not subject the product to strong impacts or allow it to drop onto a hard
surface. This can cause a malfunction.
• Do not use the battery charger to charge a battery other than a
rechargeable lithium-ion battery D-LI88. This can cause overheating,
explosion, or battery charger failure.
About the Battery Charger and the AC Adapter

Pentax Optio W90 Specifications

General

Megapixel	12.1 MP
Camera type	Compact camera
Sensor type	CCD
Image stabilizer	No
Image sensor size	1/2.3 \
Maximum image resolution	4000 x 3000 pixels
Digital zoom	6.25 x
Optical zoom	5 x
Focal length range	5 - 25 mm
Interface	USB 2.0, PC/AV: NTSC, PAL
Built-in flash	Yes
Camera shutter speed	1/4 - 1/1500 s
Minimum system requirements	USB, CD-ROM
Compatible operating systems	Windows XP SP2/Vista/7/Mac OS X 10.3.9
Focal length (35mm film equivalent)	28 - 140 mm
Normal focusing range	0.5 - ∞ m
Auto focusing (AF) modes	Spot Auto Focus
Macro focusing range (tele)	0.01 - 0.30 m
Macro focusing range (wide)	0.1 - 0.6 m
Light metering	Centre-weighted, Spot
ISO sensitivity	80, 100, 200, 400, 800, 1600, 3200, 6400, Auto
Flash modes	Auto, Flash off, Red-eye reduction
Flash range (tele)	0.3 - 2.5 m
Flash range (wide)	0.3 - 3.9 m
Internal memory	26.7 MB
Compatible memory cards	Eye-Fi, SD, SDHC
Motion JPEG frame rate	15 fps
Maximum video resolution	1280 x 720 pixels
Display diagonal	2.7 \
Display resolution (numeric)	230000 pixels
PictBridge	-
USB version	2.0
Scene modes	Children, Close-up (macro), dusk, Fireworks, Night, Night landscape, Night portrait, Panorama, Portrait, Sports, Sunset, Underwater, Landscape (scenery)
Photo effects	Black&White, Negative film, Sepia
White balance	Auto, Daylight, Fluorescent, Manual, Shade, Tungsten
Camera playback	single image, slide show
Self-timer delay	2 s
Product color	Black, Green
Battery type	D-LI88

Weight and Dimensions

Depth	25 mm
Width	107.5 mm
Height	59 mm
Weight	161 g