89
3
Taking Pictures
The digital zoom is set to O (On) in the default settings. To take pictures
using only the optical zoom and Intelligent Zoom, set the digital zoom to
P (Off).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (
23
) to select [Digital Zoom].
3
Use the four-way controller
(45) to switch between
O (On) or P (Off).
O(On) Uses Digital Zoom
P (Off) Uses only optical zoom
and Intelligent Zoom
The setting is saved.
4
Press the 3 button.
The camera returns to capture mode.
• We recommend you use a tripod to prevent camera shake when taking
pictures at high zoom.
• Pictures taken in the digital zoom range appear grainier than pictures
taken in the optical zoom range.
• Intelligent Zoom is not available under the following conditions:
When the number of recorded pixels is set to E and U (5×
optical zoom available).
In 9 (Green), C (Movie), and (Underwater movie) mode
When the sensitivity is set to 3200 or 6400.
• Intelligent Zoom and Digital Zoom are not available in C (Pet),
c (Digital SR), (Report), and c (Burst Shooting) modes.
• The image enlarged using Intelligent Zoom may appear rough on the
display. This does not affect the quality of the recorded image.
• Intelligent Zoom is available regardless of whether Digital Zoom is
turned on or off.
• Digital Zoom is not available in (Digital Microscope) mode.
• Not every zooming function is available in X (Digital Wide) mode.
To Set the Digital Zoom
Saving the Digital Zoom Function setting 1p.158
Rec. Mode
3/4
MENU
Exit
Green Button
Interval Shoot
Blink Detection
Instant Review
Memory
Digital Zoom
To Next Page
Loading...
