10
6. DISTANCE MEASUREMENT 39
6.1 TARGET SETTING 39
6.2 DISTANCE MEASUREMENT 41
6.3 QUICK MODE 42
7. CORRECTION MODE 43
7.1 CHANGING THE TARGET CONSTANT 43
7.2 CHANGING THE TEMPERATURE 44
7.3 CHANGING THE ATMOSPHERIC PRESSURE 45
7.4 CHANGING THE PPM VALUE 46
8. INITIAL SETTING 48
8.1 OVERVIEW 48
8.2 ENTERING THE MODE FOR INITIAL SETTING 1 48
8.3 ENTERING THE MODE FOR INITIAL SETTING 2 49
8.4 ENTERING THE MODE FOR INITIAL SETTING 4 49
8.5 ENTERING THE MODE FOR INITIAL SETTING 5 49
8.6 SETTING OF [DATE AND TIME] 50
8.7 EXAMPLE OF CHANGING AN INITIAL SETTING CONTENT
(SELECTION OF ATMOSPHERIC CORRECTION) 50
8.8 INITIAL SETTING 1 50
8.9 INITIAL SETTING 2 51
8.10 INITIAL SETTING 4 55
8.11 INITIAL SETTING 5 55
8.12 INITIAL SETTING OF DATE AND TIME 56
9. ACCESSING THE FUNCTIONS 57
9.1 ACCESSING BY HELP KEY 57
9.2 ACCESSING BY 007 57
10. CHECKS AND ADJUSTMENTS 59
10.1 ELECTRONIC VIAL 59
10.2 CIRCULAR VIAL 60
10.3 VERTICAL RETICLE 61
10.4 PERPENDICULARITY OF LINE OF SIGHT TO HORIZONTAL AXIS 62
10.5 VERTICAL 0 POINT ERROR 63
10.6 LASER PLUMMET 63
10.7 OPTICAL PLUMMET 64
10.8 OFFSET CONSTANT 65
10.9 BEAM AXIS AND LINE OF SIGHT 65
10.10 THE EDM BEAM AXIS 66
11. SPECIFICATIONS 67
12. DATA COLLECTOR 69
To Next Page
Loading...
Need help?
General
