26 2726 27
Resetting Date/Time
After you set your Date/Time for the rst
time, follow the instructions below to reset
date and time.
1. Press the power button to turn the
camera on.
2. Press the button, press the up/down
arrow button to select , and press the
button to enter the menu.
3. Press the up/down arrow button to select
, and press the button or right
arrow button to enter the menu.
4. Press the up/down arrow button to select
「Date & Time」and press the button
or right arrow button to enter the menu.
5. Press the left/right arrow button to select
the Date/Time to be adjusted: Time is
displayed in yyyy : MM : dd HH :mm.
6. Press the up/down arrow button to press
the value for your selected block. After
you nish your settings, press the
button to conrm.
7. Press the button and the shooting
screen appears.
To Next Page
Loading...
Need help?
General
