USER MANUAL
Peplink Balance Series
http://www.peplink.com -116 / 261 - Copyright © 2015 Peplink
These settings specify the priority of the WAN connections to be used in making VPN
bonding connections. A WAN connection will never be used when OFF is selected. Only
available WAN connections with the highest priority will be utilized.
To allow connection mapping to remote WANs, click the question mark icon found at the
top right of this section, and then click the displayed link to reveal the Connect to Remote
drop-down menu.
This feature allows you to redirect all traffic to a specified PepVPN connection. Click the button to select your
connection and the following menu will appear:
You could also specify a DNS server to resolve incoming DNS requests.
This feature allows you to change the local ID of a PepVPN connection. Click the button to select your
connection and the following menu will appear:
After updating the local ID, click Save to store your changes.
To Next Page
Loading...
