USER MANUAL
Peplink Balance Series
http://www.peplink.com -206 / 261 - Copyright © 2015 Peplink
This field allows you to define a name for this Peplink Balance unit. By default, Router
Name is set as Balance_XXXX, where XXXX refers to the last 4 digits of the serial number
of that balance unit.
Admin User Name is set as admin by default, but can be changed, if desired.
This field allows you to specify a new administrator password.
This field allows you to verify and confirm the new administrator password.
Read-only User Name is set as user by default, but can be changed, if desired.
This field allows you to specify a new user password. Once the user password is set, the
read-only user feature will be enabled.
This field allows you to verify and confirm the new user password.
To Next Page
Loading...
