peplink balance 20

To Next Page

To Previous Page

USER MANUAL

Peplink Balance Series

 HTTP/HTTPS

Web Admin

Port

This field is for specifying the port number on which the web admin interface can be

accessed.

Web Admin

Access

This option is for specifying the network interfaces through which the web admin interface

can be accessed:

 LAN only

 LAN/WAN

If LAN/WAN is chosen, the WAN Connection Access Settings form will be displayed.

WAN Connection Access Settings

Allowed

Source IP

Subnets

This field allows you to restrict access to the web admin to only defined IP subnets.

 Any - Allow web admin accesses from anywhere, without IP address restrictions.

 Allow access from the following IP subnets only – Restricts the ability to access

web admin to only defined IP subnets. When this option is chosen, a text input area

will appear:

Enter your allowed IP subnet addresses into this text area. Each IP subnet must be in the

form of w.x.y.z/m. w.x.y.z represents an IP address (e.g., 192.168.0.0), and m represents the

subnet mask in CIDR format, which is between 0 and 32 inclusively. For example:

192.168.0.0/24.

To define multiple subnets, separate each IP subnet, one per line. For example:

192.168.0.0/24

10.8.0.0/16

Allowed WAN

IP Address(es)

This is to choose which WAN IP address(es) the web server should listen on.

peplink balance 20 - Page 208