USER MANUAL
Peplink Balance Series
http://www.peplink.com -87 / 261 - Copyright © 2015 Peplink
PepVPN
Profiles to
Bridge
A
The remote network of the selected PepVPN profiles will be bridged with this local LAN,
creating a Layer 2 PepVPN, they will be connected and operate like a single LAN, and any
broadcast or multicast packets will be sent over the VPN.
Remote
Network
Isolation
A
Enable this option if you want to block network traffic between the remote networks, this will
not affect the connectivity between them and this local LAN.
When Layer 2 bridging is enabled, this field specifies the port to be bridged to the remote
site. If you choose WAN, the selected WAN will be dedicated to bridging with the remote
site and will be disabled for WAN purposes. The LAN port will remain unchanged.
Override IP
Address When
Bridge is
Connected
A
Select "Do not override" if the LAN IP address and local DHCP server should remain
unchanged after the Layer 2 PepVPN is up.
If you choose to override IP address when the VPN is connected, the device will not act as
a router, and most Layer 3 routing functions will cease to work.
A
- Advanced feature, please click the button on the top right-hand corner of the
“Network Settings” menu to activate.
To Next Page
Loading...
