6
7500 Series Manual
1 Preface
We are pleased that you have chosen a quality product from Pepperl+Fuchs.
This manual will help you meet the safety and protection requirements for systems with explosion
protection in equipment group II Zones 2 or 22, Class I or II, Division 2 when installing, commissioning,
and using the 7500 control unit and its components. This important information will help you use the 7500
purge and pressurization system safely and correctly.
We reserve the right to make technical changes.
Publisher with responsibility for content:
Pepperl+Fuchs GmbH
Lilienthalstraße 200
68307 Mannheim, Germany
1.1 Information on This Manual
Knowledge of the basic safety regulations and additional training and experience in the area of explosion
protection are essential for the safe handling and failure-free operation of the 7500 series purge and
pressurization system.
These operating instructions contain important data and information to ensure the safe use of the
7500 system in hazardous areas and to meet the requirements of Directive 2014/34/EU. This manual,
particularly the safety information, must be followed by all personnel who work on the system.
1.2 Responsibility of the Operator and/or Installer
The operator and/or installer undertake to ensure that only specialist, trained personnel work on the 7500
series purge and pressurization system and that they
are familiar with the occupational safety and accident prevention regulations and have been briefed
regarding handling of the unit.
have the additional knowledge of explosion protection that is required for work on explosion protected
components.
are familiar with the relevant rules and regulations for the installation, operation, and maintenance of
explosion-protected systems.
have read the safety section and warnings in this manual.
To Next Page
Loading...
Need help?
General
