Pepperl+Fuchs Absolute Rotary Encoder User Manual

2017-04
64
Absolute Rotary Encoder
Programmable Parameters
9.5.65 Object 6402h: Work Area High Limit
This object indicates the position value, at which bit 1 of the according work area state channel
in object 6400h shall flag the overflow of the related work area.
This object is hardwired with 2105h (Limit Switch Max).
9.5.66 Object 6500h: Operating Status
This object shall provide the operating status of the encoder. It gives information on encoder
internal programmed parameters.
The operating status object corresponds to the value of the object 6000h and 2100h.
9.5.67 Object 6501h: Singleturn Resolution
The object contains the physical measuring steps per revolution of the absolute rotary encoder.
9.5.68 Object 6502h: Number of Distinguishable Revolutions
This object contains number of revolutions of the absolute rotary encoder.
Subindex Description Data Type Default Value Access
Restore after
Boot up
0h Number of subindices Integer 32 1h ro
1h Work area low limit
channel 1
Integer 32 0h rw yes
Ta b l e 9 . 8 0
Subindex Description Data Type Default Value Access
Restore after
Boot up
0h Number of subindices Integer 32 1h ro
1h Work area high limit
channel 1
Integer 32 0h rw yes
Ta b l e 9 . 8 1
Subindex Description Data Type Default Value Access
Restore after
Boot up
0h Operating status Unsigned 16 ro no
Ta b l e 9 . 8 2
Subindex Description Data Type Default Value Access
Restore after
Boot up
0h Singleturn Resolution Unsigned 32 See nameplate ro no
Ta b l e 9 . 8 3
Subindex Description Data Type Default Value Access
Restore after
Boot up
0h Number of
Revolutions
Unsigned 16 See nameplate ro no
Ta b l e 9 . 8 4

Pepperl+Fuchs Absolute Rotary Encoder Specifications

General

Brand	Pepperl+Fuchs
Model	Absolute Rotary Encoder
Category	Industrial Equipment
Language	English