Pepperl+Fuchs LB Series - Page 17

LB Remote I/O System
Product Specifications
2018-07
17
Figure 2.17 Front screw terminal dimensions
L = 33.3 mm for 6-pin terminal and 40.9 mm for 8-pin terminal
Figure 2.18 Spring terminal dimensions
L = 33.3 mm for 6-pin terminal and 40.9 mm for 8-pin terminal
Figure 2.19 Spring terminal dimensions
Protective Covers
Protective covers are used to protect the wiring to the terminal blocks, so that no bare
conductive parts are exposed. Protective covers are available in green and blue. Use green
protective covers for non-intrinsically safe circuits and blue protective covers for intrinsically
safe circuits.
 Protective covers
• Green: LB9008A, LB9010A
• Blue: LB9108A, LB9120A
Figure 2.20 Protective cover dimensions
L = 25.25 mm for protective covers for 6-pin terminals and 32.87 mm for protective covers for 8-pin terminals
Front Screw Terminals
Spring Terminals
Spring Terminals for Single-Width I/O Modules with 2x8 Connections
21.7
L
12.3
20.8
L
12.4
19.2
11.75
20.6
14.5L
39