This section displays a variety of information about your wireless network.
This field displays your access point’s SSID.
The radio frequency currently used by your access point appears here. If you’re using
the AP One AC mini or the AP One In-Wall and have configured both radios, this
displays both radios in use.
This field displays the security policy your access point is currently using. If you’re using
the AP One AC mini and have configured both radios, this displays channels in use for
the 2.4GHz and 5GHz bands.
The channel currently used by your access point is displayed in this field.
If your access point is using a VLAN ID for management traffic, it will appear here. A
value of 0 indicates that a VLAN ID is not being used.
Your access point’s MAC address appears here. If you’re using the AP One AC mini
and have configured both radios, this displays a MAC address for both the 2.4GHz and
5GHz radio.
To Next Page
Loading...
