7.1.5 SNMP
SNMP, or simple network management protocol, is an open standard that can be used
to collect information about your access point. The SNMP section offers a range of
settings to control simple network management protocol access.
This field shows the AP name defined at System>Admin Security.
This option specifies the port which SNMP will use. The default port is 161.
This option allows you to enable SNMP version 1.
This option allows you to enable SNMP version 2c.
This option allows you to enable SNMP version 3.
To add a community for either SNMPv1 or SNMPv2c, click the Add SNMP Community
button in the Community Name table, which displays the following screen:
To Next Page
Loading...
