Check this box to enable network discovery. Note that setting Channel to Auto will
activate this feature automatically.
This setting controls the interval, in seconds, that your access point scans for nearby
networks.
This setting specifies the time, in milliseconds, that your access point scans any
particular channel while searching for nearby networks.
Scheduled Radio
Availability
Click Custom Schedule to specify radio availability schedule options or select Always
On to make the radio continuously available.
This checkbox enables Wi-Fi Multimedia (WMM), also known as Wireless Multimedia
Extensions (WME), on your access point. The default is enabled.
7.2.3 WDS
A wireless distribution system (WDS) provides a way to link access points when wires
are not feasible or desirable. A WDS can also extend wireless network coverage for
wireless clients. Note that your access point’s channel setting should not be set to Auto
when using WDS.
To create a new WDS, click Add.
Check this box to enable WDS.
To Next Page
Loading...
