PerkinElmer EnVision User Manual

Information about user instructions and warnings
41
Picture 2.
The protective casing of the laser and the exit direction of the
optical fiber.
Safety switches and lid locking
The lid has a locking mechanism to ensure that it cannot be opened during
measurements. The mechanism is designed so that two solenoids will lock
the lid before the measurement is started. However, there is no specific
control to ensure that the locking mechanism functions properly. Therefore,
besides the locking mechanism, additional protection is needed. The
purpose of the locking mechanism is mainly to prevent the user from
opening the lid during measurement and destroying the measuring results.
Laser light exit direction
Optical fiber
inside the cover
Remote
interlock
connector

PerkinElmer EnVision Specifications

General

Light Source	Xenon flash lamp
Software	EnVision Manager
Read Modes	Absorbance, Fluorescence, Luminescence, Time-Resolved Fluorescence, Fluorescence Polarization
Plate Formats	384-well
Detection Technology	PMT
Temperature Control	Ambient to 45°C