PerkinElmer EnVision User Manual

Routine maintenance
54
Reverse the procedure to reinstall the magazine table and magazines.
Changing filter slides
1. Lift the instrument lid.
2. You will see the ends of the excitation and emission filter slides directly
in front of you. Pull out the slide you want to get access to.
3.
Add, remove or exchange filter modules as needed.
4. The filter module snaps into place in the filter slide.

PerkinElmer EnVision Specifications

General

Light Source	Xenon flash lamp
Software	EnVision Manager
Read Modes	Absorbance, Fluorescence, Luminescence, Time-Resolved Fluorescence, Fluorescence Polarization
Plate Formats	384-well
Detection Technology	PMT
Temperature Control	Ambient to 45°C