PerkinElmer Lambda 465 Installation Instructions

09931238D
11
11. Connect the power cord to the Peltier Controller.
Figure 16 Connecting the power cord
12. Turn on the power of the Lambda 465 and the Peltier Controller.
Figure 17 Back of the instrument connections
CAUTION
ATTENTION
The Air vent manual button should be off before turning on the main power of the
Peltier Controller and also during the operation since it could make a trouble for the
communication between Lambda 465 and Peltier Controller.
Le bouton d'actionnement manuel de la ventilation doit être désactivé avant que le
contrôleur Peltier ne soit mis sous tension et pendant le fonctionnement de ce
dernier afin d'éviter qu'une erreur de communication entre le Lambda 465 et le
contrôleur Peltier ne se produise.
13. Check that the power LED shows a blue color.
Figure 18 Power LED is blue

PerkinElmer Lambda 465 Specifications

General

Brand	PerkinElmer
Model	Lambda 465
Category	Measuring Instruments
Language	English