Perkins 2206-E13 - Emissions Certification Film; Customer Specified Parameters; Programmable Monitoring System (PMS)

SEBU8337 19
Product Information Section
Product Identification Information
i02770895
Emissions Certification Film
g01385765
Illustration 1 5
Typical example
The emission certification film is located on the left
hand side of the valve mechanism cover.
i02817239
Customer Specified
Parameters
To record programmed specifications, use the
following blanks.
Customer Passwords (If required).
•
First Password ___________________________________________
•
Second Password ______________________________________
Rating Selection (L-N) ________ __________________________
Equipment ID ______________________________________________
Programmable Mon itoring System
(PMS)
The Programmable Monitoring System determines
the level of action that is taken by the ECM in
response to a condition that can damage the engine.
These conditions are identified by the ECM from the
signals that are produced from the following sensors.
•
Inlet Manifold Temperature Sensor
•
Coolant Temperature Sensor
•
Engine Oil Pressure Sensor
•
Engine Crankshaft/Camshaft Sensors
•
Inlet Manifold Pressure Sensor
•
Fuel Temperature Sensor