If a Max. and/or Min. temperature lock has been set, it will also be possible to change the temperature T set within
these locks (see par. 10.3).
t1 = 20,0 - o fortCCn
t2 = 17,0 - EconomyC
Factory preset T Set temperatures ()can be changed as required
O 5 C -FF = .0 Antifreeze*
Example: boiler in operation with room temperature below:
in Winter mode
*The value of the (Anti-Freeze) levelTset OFF can
ONLY be changed by accessing the dedicated
menu (see par. 10.5).
t1 = 24,0 C - Confort
t2 = 27,0 C - Economy
OFF = -** C Thermal protection (disabled)
in Summer mode
Example: air conditioner operating with room temperature higher than:
It will be possible to change the preset Set temperatures according to the level chosen, bearing in mind that:
T set must be must be .in WINTER operation t1 greater than or equal to t2; t2 greater than or equal to OFF
T set must be must be (if enabled).in SUMMER operation t1 less than or equal to t2; t2 less than or equal to OFF
7.2 - SELECTING AND SETTING THE DESIRED TEMPERATURE LEVEL: t1 (Comfort), t2 (Economy), OFF (Antifreeze or Thermal protection)
From normal operation of the device, pulse the button, display theMode , confirm this by pressing thedesired temperature level t1 or t2 or OFF
OK button.
Confirm with OK button
the desired level
example: t2 (Economy)
**Enabling and changing the value of the OFFTset
(Thermal protection) level will ONLY be possible by
accessing the dedicated menu (see par. 10.5).
It will be possible to change the value directly by pressingcurrent T set
the buttons which will be saved automatically.,
Normal operation
results in a change of 0.1 degrees;
Each press of or
7 - USE OF THE THERMOSTAT
11
Changing the value of level (Antifreeze or Thermal protection) willT set OFF
ONLY be possible by accessing the dedicated menu (see par. 10.5).
To Next Page
Loading...
