The Restore operation is recommended to be carried out by the
qualified installer or experienced user, as indicatedin paragraph 10.9 of
the menu:
5
Active season
Set t1 COMFORT Winter
Set t2 ECONOMY Winter
Set t WinterOFF antifreeze ( )
Set t1 COMFORT Summer
Set t2 ECONOMY Summer
Temp. locks Winter
Temp. locks Summer
Temp. adjustment mode
Differential hysteresis
Thermal differential
On:OFF
Modulating period
Room temp. correction
Room temp. correction
Display brightness
Back-lighting
Winter
20.0°C
17.0°C
5.0°C
24.0°C
27.0°C
Disabled
Disabled
Modulating proportional
0.3°C (not active)
On:OFF )(not active
7 min.
0,0 °C
0,0 °C
Level 7
Switched off after 6 sec.
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
none
Default
Default
Default
Default
Set tOFF thermal protection(Summer)
Disabled
Default
It will be possible to perform the same operation by following
the instructions in paragraph 10.10 of the menu:
Installer password
not active
Default
Keyboard lock
not active
Normal operation
Press simultaneously
External input
2 -FACTORY SETTINGS
The data entered in the thermostat called «FACTORYSETTINGS» refer to operation defined as «Standard».
The following chapters describe all customisable functions, in order to satisfy any ambient comfort need.
FACTORY SETTINGS TABLE (default)
RESTORE «Installer RESET»
Restore many factory settings (default)
RESTORE brings the thermostat back to factory settings with the
exception of some items as shown in the table.
RESTART
Should the thermostat feature malfunctioning, wrong displays or other
incorrect conditions, perform a . Simultaneously press«User reset»
for 4 sec . the ands Mode OK keys.
The thermostat resumes normal operation.
It does not cancel the entered settings
IMPORTANT retention in memory of all the data entered.: in case of a power black-out (230V~), the thermostat guarantees
In case of absence of power supply the display switches off saving all the programmed settings effected, when power supply is
reinstated, the display switches back on and the device returns to its normal functions.
PARAMETER
DEFAULT
RESTORE
To Next Page
Loading...
