WARNINGS!
3
PRESENTATION
Dear Customer, thank you for choosing our product.
Read this manual carefully before using the product as it provides important guidelines regarding safety, installation and use.
The manual must be preserved with care for future reference
. The manufacturer reserves the right to make all the technical
and construction changes it deems necessary without prior notice.
The thermostat is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or
by those with a lack of experience and knowledge of the instructions, unless they are supervised or have received the necessary
instructions concerning use of the device by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the device.
If 0.0 °C or 45.0 °C room temperature flashes on the display, the device is still
,the measured temperature is beyond the scale
operational. In the event of a temperature probe failure, code will be shown on the display (see par. 11).E1
IMPORTANT retention in memory of all the data entered: in case of a power black-out (230V~), the thermostat guarantees .
When mains power is restored, the display turns on and the device returns to the active operating mode before the power failure.
If necessary, gently clean the thermostat and the display with a soft, dry cloth.
&
The installation and electrical connection of the programmable thermostat must be implemented by qualifiedonly a
electrician and in conformity with current laws and regulations.
Before starting any operations on the device, disconnect the 230V~ mains power supply
The thermostat, suitable for all heating and/or cooling system, is fitted with a large and clear backlit display to keep all its functions under control
in real time. The fundamental feature is its easy to use menu navigation, which makes it extremely user-friendly despite its comprehensive range
of functions. The thermostat is factory-set to adjust temperature in a modulating Proportional operation may be selected with settable duration
cycles (from 7 to 20 minutes): this system ensures the desired temperature is maintained more stable, increasing user comfort and is
particularly suitable for installations with high thermal inertia such as, for instance, for underfloor radiant panels; alternatively it is possible to
select temperature regulation in Differential ON/OFF mode with the hysteresis settable from 0.2°C to 1.2°C to adapt to the thermal inertia of your
specific system. The set temperature scale is in degrees Centigrade with the option to calibrate room temperature measurement setting a
correction value (from - to + °C).6 6 Special attention was devoted to optional Set temperature (MAX/MIN) lock, adjustableenergy saving:
antifreeze thermal protection temperature value, control through an external contact, are conducive to avoiding wasting energy with/ remote
consequent savings.
To Next Page
Loading...
