SPECIAL TOOLS
Page: 6
Reproduction or translation, even partial, forbidden without the written consent of Peugeot Motocycles
SPECIAL TOOLS
Clutch bushing 53527
Casing extractor and opening tool 64706
Shoulder locator 64710
Pin Ø 10 mm pitch 100 64711
Shell for Ø 40mm bearing 64728
Shell for Ø 47mm bearing 64729
Pin Ø 11 pitch 100 64754
Engine mount 64765
Engine mount adapter 65255
Protective cap small model 68007
Decompressor removal/fitting tool 68048
Clutch strap 68460
Protective cap large model 69098
Butterfly nut 69104
Bearing and crank assembly seal guide 69108
Bearing and crank assembly seal remover 69109
Assembly guide 69110
Assembly plate tool 69111
Assembly guide 69112
Assembly guide 69113
Bearing and crank assembly seal remover 69114
Assembly guide 69115
Casing open/close bush 69137
Clutch setting plate 69140
Clutch fitting setting shaft 69141
Clutch alignment dowel 69142
Seal tapered dowel 69143
Magneto wheel extractor 69254
Pin Ø 10 mm pitch 125 750069
Plate for opening/closing casings 750369
Governor removal/refitting support 750411
1.5 mm base washer 750495
Piston clip pliers 752000
RCX/SPX driven pulley sprocket removal tool 754269
Adjustable pin wrench 755586
To Next Page
Loading...
