Pfaff 1571 - Cutting Stroke (on the PFAFF 1571); Cutting Stroke (on the PFAFF 1574 and 1591)

Adjustment
38
15.05.06 Cutting stroke (on the PFAFF 1574 and 1591)
Requirement
When the edge trimmer is engaged and the needle is in the needle hole, the stroke of knife 3
should be half in front of and half behind the needle, when the motor shaft isturned by hand.
 Switch off the machine and engage the edge trimmer.
 Adjust knife holder 1 (screw 2) according to the requirement.
Fig. 15- 28
1
2
3
1/2
1/2