Pfaff 1571 - Sewing Motor Errors; Warning Messages

Adjustment
60
15.09 Sewing motor errors
Error Description
48
Timeout for increasing speed
49
Timeout from deadman
50
Timeout for initialisation
51
Number of communication attempts exceeded
52
Timeout during communication
53
Invalid command
54
Checksum wrong
55
Invalid data
56
Parameter does not exist
57
Parameter limits exceeded or exceeded
58
Sewing motor has not turned yet
70
Motor blocked
71
External synchronization mark not found
72
Excess current (20A)
73
Sewing motor not plugged
74
Synchronization mark at the fi rst attempt not found
75
Current sensors out of tolerance
76
Deadman expired
77
Error at brake resistor
78
Overvoltage
79
Undervoltage
80
Fatal, unrecoverable internal error
81
Synchronization mark of the sewing motor is missing
82
No valid hardware identifi er
83
Ground fault of the sewing motor detected
15.10 Warning messages
Error Description
Warning 2 Bobbin thread error
Error Description
E 317
Interface to the controller E317 / xx
xx = 1: buffer overfl ow
2: Receive ring buffer overfl ow
3: Sender input buffer overfl ow
11: Send
12: receiving
42: Checksum wrong
45: Timeout
45: Interface protocol
46: Timeout when sending the machine data