Adjustment
59
Error Description
E 040
Stepper motor 1 E040/xx
xx= 1: Wrong command
2: Overtemperature
3: Excess current
E 041
Stepper motor 2 E041/xx
xx= 1: Wrong command
2: Overtemperature
3: Excess current
E 042
Stepper motor 3 E042/xx
xx= 1: Wrong command
2: Overtemperature
3: Excess current
E 101
Program number invalid (3 - 99)
E 102
Error in the sewing program
E 106 Incorrect stitch length
E 107 Ramp not completed
E 110 Needle drive mid-point not found
E 111 Sewing displacement error
E 125 Fatal, unrecoverable internal error
E 300
Error in program E300 / xx
xx= 9: Program not available
13:
Error in the program
E 301
Error with Commander E301 / xx
xx= 1: Directory full
2: Directory could not be created
3: directory name
4: List of machine data must not be deleted
5: Machine data can not be deleted
6: Directory can not be deleted (not empty?)
7: File can not be deleted
Files can not be deleted
9: Current directory can not be deleted
10: Marked fi les can not be deleted
11: not empty directory can not be deleted
12: Directory can not be copied
13: File can not be copied
14: File can not be overwritten
15: Directory can not be overridden
16: File can not be copied to itself:
17: Marked fi les can not be copied
18: Empty fi le
19: The directory of the machine data must not be copied
20: read-only
To Next Page
Loading...
