Adjustment
50
15.07.03 Example of a parameter entry ( with BDF S5 )
Switch the machine on.
Press the TE/Speed key twice to access the parameter entry function.
The status text "TE" appears on the display and the pedal functions are locked to prevent
an accidental start-up of the machine.
Select the desired parameter, e.g. "660" bobbin thread monitor by pressing the
corresponding +/- keys.
Set the desired value for the parameter, e.g. "0" to switch off the bobbin thread monitor
by pressing the corresponding +/- key.
Possibly. Enter code 1500.
No
VAL
2 x
The value is taken over and the machine switches to sewing mode by pressing the
TE/Speed key.
No VAL
101 on
TE
No VAL
2201 1
TE
No VAL
2201 0
TE
To Next Page
Loading...
