Pfaff 1571 - Page 52

To Next Page

To Previous Page

Adjustment

 If necessary, Enter the code number, see chapter 9.10 Entering / changing the code

number.

 For example, set value 1.

 Conclude the input.

Main Page

Table of Contents3
Tools, Gauges and Other Accessories5
Abbreviations5
Explanation of Symbols5
Adjusting the Basic Machine6
Needle Pendulum Basic Setting6
Needle Position in Sewing Direction7
Limiting the Needle Bar Frame on the PFAFF 1571And 15918
Preadjusting the Needle Height9
Needle Rise, Hook Clearance, Needle Height and Needle Guard (on the PFAFF 1571)10
Needle Rise, Hook Clearance, Needle Height and Needle Guard (on the PFAFF 1574)11
Needle Rise, Hook Clearance, Needle Height and Needle Guard (on the PFAFF 1591 and 1593)12
Needle Position Crosswise to Sewing Direction (on the PFAFF 1571)13
Needle Position Crosswise to Sewing Direction (on the PFAFF 1574)14
Needle Position Crosswise to Sewing Direction (on the PFAFF 1591 and 1593)15
Height and Stroke of the Bobbin Case Opener16
Height of the Feed Wheel (on the PFAFF 1571)17
Height of the Feed Wheel (on the PFAFF 1574)18
Height of the Feed Wheel (on the PFAFF 1591 and 1593)19
Clearance between Roller Presser and Feed Wheel20
Roller-Presser21
Hold-Down Device (Only with PFAFF 1574)22
Automatic Presser-Foot Lifter23
Knee Lever24
Tension Release25
Thread Check Spring (on to PFAFF 1571; 1591 and 1593)26
Thread Check Spring (on the PFAFF 1574)27
Thread Tension Control -906/11 (on the PFAFF 1591)28
Bobbin Winder29
Roller-Presser Pressure30
Lubrication31
Re-Engage Safety Coupling32
Adjusting the Edge Trimmer -725/0433
Position of the Knife Holder (on the PFAFF 1574 and 1591)34
Position of the Knife Holder (on the PFAFF 1571)34
Knife Stroke (on the PFAFF 1571)35
Knife Stroke (on the PFAFF 1574 and 1591)36
Cutting Stroke (on the PFAFF 1571)38
Cutting Stroke (on the PFAFF 1574 and 1591)38
Knife Position39
Adjusting the Thread Trimmer -900/8140
Resting Position of the Roller Lever / Radial Position of the Control Cam40
Position of the Thread Catcher Holder41
Distance between Thread Catcher and Needle Plate42
Position of the Thread Catcher43
Knife Position and Knife Pressure44
Bobbin Thread Retaining Spring45
Manual Cutting Test46
Linkage Rod (Only on the PFAFF 1574)47
Parameter Settings48
Overview of Parameter Functions (with BDF S5)48
Overview of Parameter Functions (with BDF P1)49
Parameter Input Example (with BDF S5)50
Parameter Input Example (with BDF P1)51
Parameter List for Control DAC Compact53
Error Messages and Description58
Sewing Motor Errors60
Warning Messages60
Update (with SD Card or USB)61
Circuit Diagrams62

Pfaff 1571 - Page 52

Table of Contents

Other manuals for Pfaff 1571

Related product manuals