Operating Controls
18
functions that can be called up by pressing on the respective point on the monitor. Pressing
the respective function causes its immediate actuation or activation/deactivation or another
menu will appear, e.g. for entering a value. Activated functions are indicated by pictograms
shown inversely. Apart from the bobbin change function, the pictograms and texts without
border are only for display purposes and cannot be called up by pressing them.
SD card 2 in the control panel can be used to import seam programs.
Presentation of functions
Normal pictogram = Function deactivated (inactive)
Inverse pictogram = Function activated (active)
To Next Page
Loading...
Need help?
General
