Maintenance and Care
65
12.03 Topping up the oil tank
The oil reservoir must always
have oil in it.
O Whenever it is necessary to refill the res-
ervoir, tilt back the machine and let it rest
on the sewing head support.
O Fill the oil through the hole 1 into the res-
ervoir 2 up to the level of the front edge
(see arrow).
Return the machine to its
upright position using both
hands!
Danger of injury by crushing
between the machine and the
table top.
Only use oil with a centre viscosity of 22.0 mm
2
/s at 40 °C and a density of
0.865 g/cm
3
at 15 °C.
We recommend PFAFF sewing machine oil part no. 280-1-120 144.
Fig. 12 - 02
2
1
12.04 Cleaning the blower air filter
O Remove the cover 1.
O Remove the filter element and blow it
out with compressed air.
O Insert the cleaned filter element and re-
place the cover 1.
Fig. 12 - 03
1
To Next Page
Loading...
