Input
63
11.06 Sewing motor errors
Error Description
ERROR: 34 Brake path too short
ERROR: 35 Communication
ERROR: 64 Mains monitor
ERROR: 65 Excess current directly after mains on
ERROR: 66 Short circuit
ERROR: 67 Mains off
ERROR: 68 Excess current during operation
ERROR: 69 No increments
ERROR: 70 Motor blocked
ERROR: 71 No incremental encoder connector
ERROR: 73 Faulty motor operation
ERROR: 75 Control locked
ERROR: 170 Transmission invalid
ERROR: 171 Zero mark invalid
ERROR: 173 Motor blocked in 1st stitch
ERROR: 175 Internal starting error
ERROR: 222 Dead man monitoring
To Next Page
Loading...
