Pfaff 2481-3/01-980/30 - Selecting the seam program

Set-up
35
9.11 Selecting the seam program
With the seam program selection function it is possible to select either manual or
programmed sewing. The programmed sewing function is called up by selecting a seam
program number from 0 - 65.
O Switch the machine on.
O Call up the seam program selection menu.
O Enter the seam program number with the number keys.
O or
O Scroll through the seam program numbers.
O Conclude the input and change to the programmed sewing mode with the selected
seam program number.
O or
O Take over the selected program number and change into the seam programming
function, see chapter 11.02 Entering the seam program.
O or
O Select the manual sewing mode. The program number is not taken over.
0 - 65