Pfaff 2481-3/01-980/30 - Entering compensation stitches

Set-up
32
9.09 Entering the number of compensation stitches
In the manual sewing mode it is possible to enter the number of compensation stitches,
which will be sewn after the recognition of the material edge till the machine stops.
O Switch the machine on.
O Switch on the edge sensor and call up the compensation stitches input menu.
O Enter the number of compensation stitches with the number keys.
O or
O Enter the number of compensation stitches step by step.
O Conclude the input and take over the altered value.