Pfaff 2481-3/01-980/30 - Error messages and description

Sewing
42
Input mode
Calls up the input mode.
Depending on the seam program, further symbols showing corresponding
values or selected functions may appear on the display.
In addition, when the bobbin thread monitoring function is activated, the
number of remaining stitches is shown, and when the speed display function
is activated the current speed is shown, see chapter 11.04.03 List of
parameters.
O Sewing is carried out using the pedal functions, see chapter 7.03 Pedal.
10.03 Error messages
If an error occurs, the text "ERROR" appears on the display, together with an error code. An
error message is generated by incorrect settings, faulty elements or seam programs, as well
as overloading.
For an explanation of the error codes, see chapter 11.05 Error codes and description.
O Correct the fault.
O Acknowledge the elimination of the error.