Input
46
11.02.01 Selecting the seam types
For better information during programming and sewing, it is possible to show a diagram of
different seam types. To do so, the seam types must be allocated to the seam programs.
With the exception of the free seam, for each seam type the number of seam zones and the
starting point is set. The functions and values in the individual seam zones can be altered.
The seam types are divided into groups for flaps, cuffs, collars and shoulder flaps. In addi-
tion, one free description space is available, if it is not possible to select a pre-assigned work
step from one of the groups. The group currently activated is shown by an inverse symbol.
O Switch the machine on.
O Select the program number, see chapter 9.11 Selecting the seam program.
O Call up seam program input.
O Call up the seam type selection menu.
3
12
3
O Select the desired seam group.
To Next Page
Loading...
