Pfaff 2481-3/01-980/30 - Entering seam depth

Input
48
11.02.02 Entering the seam depth
As the edge sensors are arranged for sewing at right angles, if other angles to the edge
have to be sewn, a correction value must be entered.
O Switch the machine on.
O Select the program number, see chapter 9.11 Selecting the seam program.
O Call up seam program input
3
12
2.0
0.0
0
O Call up the seam depth input menu.
O Enter the desired seam depth.
O Call up the correction value input menu
0.0