1:17
Introduction
Lid
Lift the lid to open. All stitches are displayed on the inside of the lid.
Sewing with free arm
In order to sew using the free arm, swing the accessory tray to the left
and lift it up out of the hole.
When replacing the accessory tray, insert the pin into the hole and
swing the tray to the right to close until it is flush with the free arm of
the sewing machine.
Carrying case
Use the hard carrying case to protect your machine when transporting
it. The machine’s integrated handle can be accessed through a slot in
the top back of the case. There is a convenient storage compartment to
hold the lead cord, foot control and instruction book.
To Next Page
Loading...
