Pfaff perfomance 2058 - Electronic Knee Lift

2:15
Preparations
Electronic knee lift
Your sewing machine comes with an electronic
knee lift for regulating the presser foot height. It
is useful when you need both of your hands to
guide the fabric.
1. Push the knee lift, with the flat side facing
up, into the hole on the front baseplate of
your machine.
2. Adjust the rectangular bar on the knee lift
until it is positioned at a comfortable height
for you.
If you press the knee lift to the right, the presser
foot will raise. Now you can guide the fabric
with both hands.
To remove the knee lift, pull it gently straight
out of the hole.