1:4
Table of content
1
2
3
4
Introduction
Overview of your machine 1:9
Standard presser feet and accessories 1:10
Stitch chart 1:12
Lid 1:17
Carrying case 1:17
Sewing with free arm 1:17
Accessory tray 1:18
Preparations
Voltage switch 2:2
Electrical connection 2:2
Connecting the foot control 2:
2
On/off switch 2:2
Presser foot lift 2:3
Changing the presser foot 2:3
The IDT (Integrated Dual Feed) 2:
4
Lowering the feed dogs 2:5
Bobbin winding 2:6
Inserting the bobbin and bobbin case 2:9
Threading your machine 2:10
Integrated needle threader 2:11
Bringing up the bobbin thread 2:12
Thread cutter 2:12
Changing the needle 2:13
Threading the twin needle 2:13
Correct thread tension - How to get it 2:14
Electronic knee lift 2:15
Operating your performance
Operating your machine 3:2
Function buttons 3:2
Main menu 3:4
Selection menus 3:4
Selecting a stitch 3:6
Sewing menu 3:7
Altering the stitch settings 3:7
More options for sewing 3:
9
Context menu 3:11
Info system 3:15
Utility sewing
Getting started 4:2
Straight stitch - No 1 4:3
Sewing in zippers - No 1 4:3
Three-step zigzag stitch - No 4 4:3
Topstitching - No 1 4:4
Basting stitch - No 17 4:4
Gathering with straight stitch - No 1 4:4
Blindhem stitch - No 15 4:5
Stretch Blindhem stitch - No 16 4:5
Rolled hem with straight stitch - No 1 4:5
Overlock stitches 4:6
Buttonholes 4:7
Sewing on buttons - No 60 4:10
Eyelets - No 59 4:10
Automatic darning - No 74 and 75 4:11
Free motion darning - No 1 and 3 4:12
To Next Page
Loading...
