3:11
Operating your performance 2058
Context menu
In the context menu you can alter the basic settings or functions for the
sewing machine. Long touch the info button (9) to open the context
menu. Press this button again to close the menu. The menu will also
close when a dialogue window has been confirmed with ”ok” or ”esc”.
If the context menu is closed with the info button when a sub window
is open, the settings will not be saved.
The context menu offers specific functions for each menu. Some of the
functions are available from all menus.
Select language (Available from main menu)
With this function you select the language of your sewing machine.
Touch ”Select language”, to open the language selection window,
and touch the language of your choice. The window closes when a
language has been selected.
Audio signal (Available from all menus)
With this function you can choose an audio signal to be heard when
you touch icons, press buttons and when pop-up messages appear.
Touch ”Press button” to turn on or off the audio signal for icons and
buttons. Touch ”Message texts” to turn on or off the audio signal
for pop-up messages. If the audio signal is activated the icon is
highlighted. Touch ”ok” to save your settings.
Options for messages (Available from main, sewing, sequence and
stitch creator menus)
In this menu you can switch off the warning message that
automatically appears in the machine when the bobbin thread is
running out. You can also specify whether the machine should stop
when the warning appears. An X means that the function is switched
on. All functions are active as default. Touch “ok” to save your
settings.
To Next Page
Loading...
