2:2
Voltage switch
220V - 240V / 120V
The sewing machine is set to the voltage 220 V - 240 V. To change the
voltage to 120 V (US/Canada), you must set the voltage switch on the
underside of the machine to 120 V.
If you are unsure of the correct voltage for your country, please check
with your authorized Pfaff dealer before plugging in your machine.
On/off switch
When the on/off switch is switched on (switch function I) the sewing
lightbulb lights up and the welcome screen appears on the touch
screen.
The sewing machine is now ready to function.
”0” = OFF
”I” = ON
Connecting the foot control
Connect the plug of the foot control to the connection socket of the
sewing machine.
The sewing speed is controlled by pressing the foot control.
The foot control type AT 0070 must be used for this sewing machine.
Electrical connection
Connect the lead cord between the socket of the sewing machine and
the wall outlet.
For the USA and Canada:
This sewing machine has a polarized plug (one blade wider than
the other). To reduce the risk of electric shock, this plug is intended
to fit in a polarized outlet only one way. If the plug does not fit
fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper outlet.
DO NOT modify the plug in any way!
To Next Page
Loading...
