8:5
Maintenance
Problem/Cause Remedy
The machine does not feed or feeds irregulary
Sewing lint has collected between the feed dogs. Remove needle plate, remove lint with brush.
Feed dogs are lowered. Raise feed dogs.
The machine is running with difficulty
There are thread remnants in the hook. Remove the threads.
The machine does not sew the selected stitch
Select the desired stitch again. Switch off the machine, wait
10 seconds and switch on again.
Display incorrect or no display
When static electricity is being discharged some segments of
the display may fail.
Switch off the machine on completion of the sewing
operation and then turn it back on again after approx. 10
seconds. Select the desired stitch again.
The contrast on the display may be disturbed when the
machine is cleaned or is transported (display is illegible or
dark).
Set the contrast using the contrast adjustment.
If problems remain, contact an authorized Pfaff dealer.
Have your sewing machine serviced regularly by your authorized Pfaff dealer.
When leaving the machine, even for only a short time, switch off. This is very important if there are any children
nearby.
Non-original Parts and Accessories
The warranty does not cover any defect or damage caused by use of non-original accessories or parts.
To Next Page
Loading...
Need help?
General
